ABUS FU8006 Secvest 2WAY Wireless Alarm Control Panel (UK, DK, IT) Operating instructions - Manual (Page 21)

21
18.2. Overview of menu items in the user menu
Among other things, the user menu can be used to program the user code,
omit zones, record voice messages, read the log, activate control functions
and test detectors.
Some functions may have been blocked for the user by the installer. The
following table lists all possible menu items.
Menu item Settings
Voice Memo Play, record and delete voice messages
Omit Zones Omit zones and remove them from surveillance
Users Install, edit and delete users
View Log Read log entries
Facilities On/Off Activate/deactivate additional functions (door chime,
voice prompt and activity monitoring)
Test Test functions on the alarm centre and detectors
System Options Enter date and time, activate remote maintenance,
summer/winter time, communication information
Follow Me Enter the follow me number
Outputs On/Off Control manual outputs
Telephone Call Start manual telephone call
The user menu is equipped with a time control. If there is no input within
30 seconds, the user menu is exited automatically.
18.3. Recording voice messages
The wireless alarm centre enables the user to record individual
voice messages. These voice messages can be listened to and
deleted at any time. The system informs the user of the
existence of a voice message when the wireless alarm system is
deactivated.
This allows you to leave messages for other persons.
To record a message, proceed as follows:
Select the Voice Memo menu item.
By pressing Select you can record a voice message.