ABUS FU8006 Secvest 2WAY Wireless Alarm Control Panel (UK, DK, IT) Operating instructions - Manual (Page 22)

22
If Select was confirmed using the control button, recording begins and the
following graphic display is shown:
Recording can be stopped at any time by pressing Done.
Recording stops automatically after 30 seconds. The recording is saved
automatically after it is stopped.
,
You can now select the displayed options.
Option Meaning
Play
Message Plays back the recorded voice message.
Record
Message Starts the recording again. The old message is deleted.
Delete
Message Deletes a saved voice message.
Exit the menu item by pressing Back.
18.4. Omitting zones
If necessary, you can remove zones from surveillance (e.g. if a detector is
defective or a zone cannot be closed).
Select the Omit Zones menu item.
The system displays all trained zones. Select the zone where the settings
should be changed.
The settings are as follows: M = Monitored / O = Omitted (not monitored)
The setting can be changed here.
When the settings have been made, finish data entry by pressing Done.
These zones are not monitored when the wireless alarm system is activated.
The next time the alarm system is deactivated, these zones are
automatically included again and have to be removed again from
monitoring manually.