NXG Technology NX-RM505 User Manual
Page 41
9. LCD Button Editing
5
Save the text you completed by pressing the same function button
you selected in step 4.
6
Exit from Edit mode by pressing the MAIN button and then exit from
the SETUP mode by pressing the MAIN button once again.
10. Recalling the Pre-programmed Three-Digit Number
1
Go to the SETUP mode by pressing the MAIN and ENTER buttons
simultaneously for three seconds.
2
Press the RECAL button next to the LCD screen.
3
The LCD display will alternately flash device names and the three-
digit code number assigned to the device for 10 seconds and
then exit to the SETUP mode.
4
Before the 10 seconds are up, pressing the MAIN button on the
remote will stop the flashing and exit to the SETUP mode.
5
Exit from SETUP mode by pressing the MAIN button once again.
NX-RM505
41
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 41