NXG Technology NX-RM505 - Manual (Page 27)

3 Press one of the macro buttons, M1-M3, Power or System Off
you wish to store your macro on.
4 Press the functional buttons you wish to store in the device macro
button you selected, in the order you want them stored. You can
store up to 20 commands.
Important: Do not press the MAIN button at the beginning
of your macro, or it will not work. You can use the MAIN
button at any other step in your macro.
5 Be sure to end your macro on the Device page that you would like
it to remain on when the macro is sent in normal use.
6 Store the commands you programmed into the macro button by
pressing the Channel Up button.
7 Return to Step #3 until you have programmed all of the Macros that
you require.
8 Once you have completed the programming and wish to exit from
this mode, press the MAIN button. Exit from the SETUP mode by
pressing MAIN button once again.
Tip: The M1, M2, M3, POWER and SYSTEM OFF macros
are ‘system-wide’, meaning they will function the same
no matter what device you are in when you use them.
NX-RM505
27
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 27