NXG Technology NX-RM505 User Manual
Page 38
8. Erasing Existing Programming
3
Press the VOL button on the LCD for Volume Punch Through, the
PLAY for Transport Punch Through or the CH for Channel Punch
Through depending upon which Punch Through you want to erase.
4
Press the DEVICE button from which you wish to erase punch
through.
5
Press the same DEVICE button once again.
6
Punch through is erased when the same device button is pressed
the second time.
7
Repeat from Step 2 to erase the Punch Through for other devices.
8
Exit from Punch Through mode by pressing the MAIN button
and then exit from the SETUP mode by pressing the MAIN
button once again.
NX-RM505
38
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 38