NXG Technology NX-RM505 - Manual (Page 40)

9. LCD Button Editing
7 Save the text you completed by pressing the button you were writing
on (the same function button you selected instep 3 or device button
in step 4.)
8 Exit from Edit mode by pressing the MAIN button and then exit from
the SETUP mode by pressing the MAIN button once again.
B. To Create Or Edit Text for Favorite Channel Buttons
1 Go to the SETUP mode by pressing the MAIN and ENTER buttons
simultaneously for three seconds.
2 Press the EDIT button next to the LCD screen.
3 Press the FAV button and then the favorite channel button on which
you wish to write text. There are five LCD pages of favorite channels.
Select the page you wish to write on by pressing the PAGE button.
4 The character to be changed on the button you selected will blink
and you can change the character using the number pad buttons on
the remote control. The characters assigned to each number pad
button are shown below. It will be rotated to different character each
time the same number pad button is pressed.
Tip: You move the cursor left or right using the joystick. You
can also delete a current character by using the cursor down
of the joystick. Using the ‘cursor down’ technique is a quick
way to delete all of the text on a label.
NX-RM505
40
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 40