NXG Technology NX-RM505 User Manual
Page 20
1. Programming The Function Buttons
1
Go to the SETUP mode by pressing both the MAIN an ENT buttons
simultaneously for three seconds.
2
Press the LEARN button next to the LCD screen.
3
Select the DEVICE that contains the function button you wish to
program.
4
Press the PAGE button to go to page 2 of the device if you need to.
5
Place your original remote control head to head with the NX-RM505
about 2 inches apart on a flat surface as illustrated below.
NX-RM505
20
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 20