NXG Technology NX-RM505 - Manual (Page 28)

6. Programming Macro Buttons
B. Programming Macro Functions To The Ten device
buttons
1 Go to the SETUP mode by pressing the MAIN and ENTER buttons
simultaneously for three seconds.
2 Press the MACRO button next to the LCD screen.
3 Important: Press the PAGE button.
4 Press one of the ten device buttons you wish to store your
macro on.
5 Press the functional buttons you wish to store in the device macro
button you selected in the order you want them stored. You can
store up to 20 commands.
Important: Do not press the MAIN button at the beginning of your macro,
or it will not work. You can use the MAIN button at any other step in
your macro.
6 Be sure to end your macro on the Device page that you would like it
to remain on when the macro is sent in normal use.
7 Return to Step #4 until you have programmed all of the Macros that
you require.
8 Save the commands you selected to the macro button by pressing
the CH UP button.
9 Once you complete the programming and wish to exit from this
mode, press the MAIN button. Exit from the SETUP mode by
pressing the MAIN button once again.
NX-RM505
28
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 28