Summary of operations – NXG Technology NX-RM505 User Manual
Page 11
3. Summary of Operations
K. System Settings
All programming is done by first entering the SETUP mode
in the remote control. Press both the MAIN and ENTER buttons
simultaneously for three seconds to enter the SETUP mode.
SETUP will be shown at the top of the LCD screen.
You exit the SETUP mode by simply pressing the MAIN button.
Important:
When using the Preprogramming method starting on
page 13, always use the appropriate button as shown in the illus-
tration above when asked ‘FROM TABLE’. You may have already
changed the labels of the buttons, but the code tables are in the
positions as shown. For example, the AUDIO Code Table (refer to
pages starting at 58) will ALWAYS be the top-left button. The SAT
Code Table will always be the 4th button down on the right side of
the LCD screen, etc.
NX-RM505
11
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 11