NXG Technology NX-RM505 User Manual
Page 33
For example, for VOL you are punching through the controls of the
Audio receiver’s VOL to the TV or Cable box, enabling you to con-
trol the Audio receiver's VOL when in the TV or Cable box screen
6 Punch Through is saved when the second device is pressed.
7 Repeat from Step #2 to program Punch Through for other devices.
8 Once you complete the programming and wish to exit from this
mode, press the MAIN button. Exit from the SETUP mode by
pressing the MAIN button once again.
Tip:
When using Punch Through, think of the first Device you
select as the Device that now controls the functions and think
of the second Device as the device that you want to control
those functions. You are taking the controls of the second
device and ‘punching them through’ to the first device.
NX-RM505
33
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 33