Gotham HPEPP - Manual

TEL: 800.922.9646 © 2012 Acuity Brands Inc 1
HPEPP INSTALLATION INSTRUCTIONS
March 13, 2013
• To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards please read
all warnings and instructions included with and on the fixture box and all fixture labels.
• Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
• Installation and service should be performed by a qualified licensed electrician.
• Maintenance should be performed by qualified person(s) familiar with the products’ construction and operation and any hazards involved. Regular
maintenance programs are recommended.
• DO NOT INSTALL DAMAGED PRODUCT! This product has been properly packed so that no parts should have been damaged during transit. Inspect to
confirm. Any part damaged or broken during or after assembly should be replaced.
• These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to meet in connection with
installation, operation, or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently
for the purchaser’s or owner’s purposes, this matter should be referred to Acuity Brands Lighting, Inc.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS!
SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION
 Disconnect or turn off power before installation or
servicing.
 Verify that supply voltage is correct by comparing it
with the product information.
 Make all electrical and grounded connections in
accordance with the National Electrical Code (NEC) and
any applicable local code requirements.
 All wiring connections should be capped with UL
approved recognized wire connectors.
 All unused connector openings must be capped.
WARNING
RISK OF ELECTRIC SHOCK
 Do not exceed maximum wattage, ratings, or published
operating conditions of product.
 Do not overload.
 Follow all manufacturer’s warnings, recommendations
and restrictions to ensure proper operation of product.
WARNING
RISK OF BURN or FIRE
 Wear gloves and safety glasses at all times when
installing, servicing or performing maintenance.