Gotham 4 Ecos Open Wallwash SpecSheet User Manual
4” ecos
Luminaire Type:
Catalog Number
(autopopulated):
© 2008-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 10/30/13. Specifications subject to change without notice.
PAGE 1 OF 3
ECSRW-4-OPEN
Gotham Architectural Downlighting
LED Downlights
4” Ecos™
Open Wallwash
Solid-State Lighting
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
ORDERING NOTES
1.
Not available with finishes. TRW standard.
2.
Height of fixture increases 3”.
3.
4.
EXAMPLE: ECSRW 35/10 4AR LD 120
Series
Color temperature
Nominal lumen values
Aperture/Trim color
Finish
Voltage
Driver
ECSRW
35/
3500 K
41/
4100 K
10
1000 lumens
4AR
Clear
4PR
Pewter
4WTR
Wheat
4GR
Gold
4WR
1
White painted
(blank)
Semi-specular
LD
Matte-diffuse
120
277
347
2
(blank)
0-10V dimming ballast
Options
SF
Single fuse
EL
3
Emergency battery pack with integral test switch
ELR
3
Emergency battery pack with remote test switch
ELRHL
3
High-lumen-output emergency battery pack with
remote test switch
TRW
White painted flange
TRBL
Black painted flange
RRL
4
RELOC
®
-ready luminaire. Provides compatibility with Lithonia RELOC
system. Access above ceiling required.
CP
Chicago plenum
MFLG
Microflange™ trim
NEPP
Interface for Sensor Switch
®
nLight
®
network with integral power
supply. Refer to
NSD
Sensor Switch
®
nLight
®
dimming relay. One 5A relay with one 0-10
OPTICAL SYSTEM
•
Self-flanged, semi-specular or matte-diffuse lower reflector in combination with
highly reflective/diffuse upper reflector provides unparalleled performance and
efficiency. Patented Bounding Ray™ Optical Principle design (U.S. Patent No.
5,800,050) provides source before source image and smooth transition from top
of the reflector to bottom.
•
Outer kicker reflector with inner reflector provides uniform wallwash perfor-
mance from ceiling to floor and fixture to fixture.
•
Wallwash trim orientation is independent of housing, eliminating installation
concerns.
MECHANICAL SYSTEM
•
Housing accommodates a maximum 1-1/2” ceiling thickness.
•
Light engine and driver are accessible from above or below ceiling and can be
upgraded to accommodate future technology improvements.
•
16-gauge galvanized steel mounting bars with continuous 4” vertical adjust-
ment are shipped pre-installed. Post installation adjustment possible without
the use of tools from above or below ceiling.
•
Galvanized steel junction box with hinged access covers and spring latch. Three
combination 1/2”-3/4” and one 1/2” knockout for straight-through conduit runs.
Capacity: 8 (4in, 4out) No. 12 AWG conductors rated for 90°C.
•
Secondary housing adjustment system for precise, final ceiling to flange
alignment.
ELECTRICAL SYSTEM
•
Solid state LED light engine available in 3500 K or 4100 K color temperatures.
•
Class P, thermally protected 0-10V solid-state driver.
•
Rated system life of 50,000 hours at 70% output.
•
Thermally activated insulation detector.
•
Emergency battery pack and SIMPLY5™ energy management system available.
•
Luminaire should be installed in applications where ambient temperatures do not
exceed 50°C. Ambient temperatures that exceed 50°C will result in reduced lamp
life and will void warranty.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
•
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx