Gotham 6 Evo Non-Conductive Shower Light SpecSheet User Manual
6” evo
Luminaire Type:
Catalog Number
(autopopulated):
© 2011-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 12/12/13. Specifications subject to change without notice.
PAGE 1 OF 3
EVO-R-6-SHOWER
Gotham Architectural Downlighting
Renovation LED Downlights
6” Evo
®
Non-Conductive Shower Light, Retrofit Kit
Solid-State Lighting
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
OPTICAL SYSTEM
•
Face plate made of impact-modified acrylic for excellent durability and light
transmission
•
“Dead front” shower light for added safety
•
White painted flange
MECHANICAL SYSTEM
•
See Mounting Frame Compatibility chart for compatible Gotham mounting
frames
•
Junction box capacity: 8 (4 in, 4 out ) 12AWG rated for 90°C
•
1-1/2” maximum ceiling thickness
ELECTRICAL SYSTEM
•
Fully serviceable and upgradeable LED light engine
•
70% lumen maintenance at 60,000 hours based on IESNA LM-79-2008
•
120-277VAC, 50/60hz power supply with 0-10V dimming (10-100%); rated for
50,000-hour life
•
Overload and short circuit protected
LISTINGS
•
Fixtures are CSA certified to meet US and Canadian standards; wet location,
covered ceiling
•
IP65 rated
WARRANTY
•
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: EVO R 35/10 6DFR 120
Series
Type
Color
temperature
Nominal
lumen values
Aperture
Trim style
Voltage
Driver
EVO
R
1
27/
2700 K
30/
3000 K
35/
3500 K
41/
4100 K
10
1000 lumens
14
1400 lumens
18
1800 lumens
22
2200 lumens
6
DFR
Dead (non-conductive)
front regressed
DFD
Dead (non-conductive)
front drop
MVOLT
120
277
347
(blank)
2
0-10V dimming driver. Minimum
dimming level 10%
ECOS2
3,4
Lutron
®
Hi-Lume
®
2-wire
forward-phase dimming driver.
Minimum dimming level 1%
ECOS3
2,3
Lutron
®
Hi-Lume
®
3-wire or
EcoSystem
®
dimming driver.
Minimum dimming level 1%
Options
SF
Single fuse
RRL
RELOC
®
-ready luminaire. Provides compatibility with Lithonia RELOC system. Access above ceiling required.
NEPP
Interface for Sensor Switch
®
nLight
®
network with integral power supply
ELR
5,6
Emergency battery pack with remote test switch
NSD
Sensor Switch nLightTM dimming relay.
One 5A relay with one 0-10 VDC dimming
ACCESSORIES order as separate catalog numbers (shipped separately)
CTA4-8 YK
Ceiling thickness adapter (extends mounting frame to accommodate ceiling thickness up to 2”).
ORDERING NOTES
1.
Consult factory for mounting frames other than Gotham.
2.
3.
Not available with NEPP option.
4.
120V only.
5.
6.
Must specify 120 or 277V.