Extron Electronics VSC 900_900D User Guide - Manual (Page 35)

3-5 VSC 900/900D • Serial Communication
Flicker filter
Set a specific filter value X13 d Dvz X13 Set the vertical detail level.
Increment up +d Dvz X13 Increase vertical detail.
Increment down -d Dvz X13 Decrease vertical detail.
View the filter level d X13 Show the vertical detail level.
Test pattern
Set a specific test pattern X12 J Tst X12 Set the test pattern.
View the test pattern J X12 Show the current test pattern.
Freeze
Enable 1F Frz1 Output a “frozen” video image.
Disable 0F Frz0 Turn off freeze (output motion).
View the freeze status F Frz X2 Show the freeze status.
Example: F Frz0
Executive mode
Enable (lock image adjustments) 1X Exe1 Lock front panel adjustments;
adjust image via RS-232 only.
Disable 0X Exe0 Adjustments & selections can
be made from the front panel.
View the executive mode status X Exe X2 Show executive mode status.
Example: X Exe0
Zap (reset to default settings)
Total reset Esc zXXX ZapXXX Reset everything: all settings,
and adjustments to the factory
default.
Query firmware version
Query firmware version number Q/q x.xx Show the firmware version.
Request part number
Request VSC 900 part number N/n 60-478-01 Show the VSC 900’s part #.
Request VSC 900D part number N/nI 60-478-02 Show the VSC 900D’s part #.
Request information
Display information I/i Chn
X5
• Hrt •
X1
Vrt
X1
Show input source, horizontal
and vertical frequencies.
Command/response table for SIS commands (continued)
Command ASCII Command Response Additional description
(host to scan converter) (scan converter to host)
(Continued)