Extron Electronics VSC 900_900D User Guide - Manual (Page 22)

Installation and Operation, cont’d
VSC 900/900D • Installation and Operation 2-14
Size and Zoom menu (Size/Zoom)
The following flowchart provides an overview of the Size/Zoom menu.
Size/Zoom H Size V
0512 0512
MENU
NEXT NEXT
H Zoom V
0512 0512
NEXT
Size control
• increase or decrease the
size of an image
horizontally or vertically
(default is 512)
Zoom control
• zoom in and out
horizontally or vertically
starting with the current
size (default is 512)
Filters
Figure 2-14 — Size/Zoom menu
The default value for horizontal and vertical size is 0512. The default
values for the horizontal and vertical shift are 2048 and 1024, respectively.
The actual minimum and maximum values will vary and are based on the
incoming scan rate.
Size adjustment submenu (Size)
Use the Cursor buttons to increase or decrease the horizontal and vertical size of
an image. The default size is 512 both horizontally and vertically.
Zoom in/out adjustment submenu (Zoom)
Use the Cursor buttons to zoom into or zoom out of an image. The zoom
adjustment increases or decreases the overall size of an image and is based on
the current size setting. The default size is 512 both horizontally and vertically.
Advanced functions menu (Advanced)
The following flowchart describes the Advanced functions menu.
Advanced
Size/Zoom
Test Pattern
Off
NEXT
Input Type
RGB
NEXT
Input Atten.
2 27%
NEXT
NEXT
Test pattern
• Off (default)
• Color Bars
• 32x24 Crosshatch
• 4x4 Crosshatch
• Gray Scale Input type
• RGB (default)
• YUV
Input Attenuation level
• Default is 0
MENU
Figure 2-15 — Advanced menu