Extron Electronics TP Transmitters User Guide - Manual (Page 25)

Extron TP Transmitters • Specifications, Accessories, and Part Numbers Extron TP Transmitters • Specifications, Accessories, and Part Numbers
Specifications, Accessories, and Part Numbers, cont’d
A-3
Audio
Number/signal type ................... 1 or 2 sets of analog proprietary signals
Connectors .................................... 1 or 2 RJ-45 female
Frequency response ..................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................ 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal
level
S/N ................................................ >63 dB at the rated maximum output
Crosstalk ....................................... <-80 dB @ 1 kHz, fully loaded
Stereo channel separation .......... >80 dB @ 1 kHz
CMRR ............................................ >33 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type
TP T 15HD A, TP T 468 ... 1 stereo, unbalanced
TP T 15HD AV ................. 2 stereo, unbalanced
Connectors
TP T 15HD A, TP T 468 ... (1) 3.5 mm mini jack
TP T 15HD AV ................. (1) 3.5 mm mini jack, 2 female RCA
Impedance .................................... 5k ohms, unbalanced, DC coupled
Nominal level ............................... -10 dBV (316 mV)
Maximum level ............................ +5.5 dBu, (unbalanced) at 1% THD+N
CMRR ............................................ >75 dB @ 20 Hz to 20 kHz
Audio output — Refer to the TP Receivers Family User’s
Manual.
General
Power
TP T 15 HD A, TP T 468,
TP T 15 HD AV ................ 15 VDC, 0.8 A, external or provided by the
TP R receiver for up to 300' (91.4 m)
TP T BNC DA4 ................. 15 VDC, 0.8 A, external
The TP R 15HD A receiver does not provide power to
any twisted pair transmitter.
Temperature/humidity .............. Storage -40 to +158 °F (-40 to +70 °C) /
10% to 90%, non-condensing
Operating +32 to +122 °F (0 to +50 °C) /
10% to 90%, non-condensing
Cooling .......................................... Convection, no vents
A-2
Video
Number/signal type ................... 1, 2, or 4 sets of proprietary analog signals
Connectors .................................... 1, 2, or 4 shielded RJ-45 female
Video input
Number/signal type
TP T 15HD A, TP T 468 ... 1 analog RGBHV, RGBS, RGsB,
component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM
composite video from a single source; or
3 NTSC/PAL composite video from a
single source
TP T 15HD AV ................. 1 analog RGBHV, RGBS, RGsB,
component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM
composite video from a single source; or
3 NTSC/PAL/SECAM composite video
from a single source
and 1 NTSC/PAL/SECAM composite
video
TP T BNC DA4 .................. 1 analog RGBHV, RGBS, RGsB,
component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM
composite video from a single source; or
3 NTSC/PAL/SECAM composite video
from a single source
Connectors
TP T 15HD A, TP T 468 ... (1) 15-pin HD female (Mac and Sun/SGI
to VGA adapters are available)
TP T 15HD AV ................. (1) 15-pin HD female (Mac and Sun/SGI
to VGA adapters are available)
1 RCA female
TP T BNC DA4 .................. 5 BNC female
Nominal level ............................... 1.0 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
0.3 Vp-p for C of S-video
Minimum/maximum level(s) .... 0.3 V to 1.45 V p-p, no offset at unity gain
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 130 kHz
Vertical frequency ....................... 30 Hz to 150 Hz
Video output — Refer to the TP Receivers Family User’s
Manual.
Specifications, Accessories, and Part Numbers