Extron Electronics MTP T 15HD A AAP User Guide - Manual (Page 20)

MTP T 15HD A Architectural Plates • Specifications 16
Audio input
Number/signal type ..................... 1 stereo, unbalanced
Connectors ..................................... 1 mini stereo jack, 3.5 mm
Impedance ...................................... >10k ohms, unbalanced
Nominal level ................................ +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level .............................. +18 dBu, unbalanced at 1%THD+N
N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — local stereo output (see receiver's
specifications for remote end specs)
Number/signal type ..................... 1 stereo, balanced/unbalanced
Connectors ..................................... 1 direct insertion 3.5 mm captive screw
connector, 5 pole
Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced
Gain error .......................................
± 1 dB channel to channel
Maximum level (Hi-Z) ................. >+23 dBu, balanced or unbalanced,
at <1% THD+N
Maximum level (600 ohm) ........... >+17 dBm, balanced or unbalanced,
at 1% THD+N
Stereo channel separation ............ >60 dB @ 1 kHz
General
Recommended cable type ............ CAT 5/5e/6 (shielded or unshielded)
External power supply ................. 100 VAC to 240 VAC, 50-60 Hz, external;
to 12 VDC, 1 A, regulated
Power input requirements ........... 12 VDC, 0.5 A
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C)/
10% to 90%, non condensing
Operating: +32 to +122 °F (0 to +50 °C)/
10% to 90%, noncondensing
Rack mount .................................... No, but wall or furniture mountable in a
1-gang opening, Decora ® -style opening, or
double space high AAP opening
Enclosure type ............................... Metal
Dimensions
WM plate ............................ 4.5" H x 2.8" W x 0.1" D (1-gang)
(11.4 cm H x 7.1 cm W x 0.3 cm D)
D plate ................................. 2.6" H* x 1.3" W x 0.1" D (Decora ® style)
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
Fits the opening in a 1-gang Decora ®
faceplate. *Height is 3.8" (9.7 cm)
including mounting tabs.
AAP plate ........................... 1.4" H x 3.5" W x 0.1" D
(Double space high AAP)
(3.6 cm H x 8.9 cm W x 0.3 cm D)