Extron Electronics ISM 182 - Manual (Page 50)

Programmer’s Guide, cont’d
Integration Scaling Matrix Switcher • Programmer’s Guide 4-6
1Blu
X19
The blue-only mode has been turned on or off for one or both outputs from the
front panel.
X19
is the on/off status for the either or both outputs. The leading “1”
is meaningless.
1Fil
X19
The edge enhancement mode has been turned on or off for one or both outputs
from the front panel.
X19
is the on/off status for the either or both outputs. The
leading “1” is meaningless.
RGB delay
X2
Dly
X20
A front panel RGB delay adjustment has occurred.
X2
is output number and
X20
is
the delay value, in 0.01 second steps.
X20
can be as much as 50 = 5.0 seconds.
Test pattern
Tst
X19
*
X21
A test pattern has been turned on or off for one or both outputs from the front
panel.
X19
is the on/off status for the two outputs and
X21
is the test pattern
selected.
Audio gain and attenuation
X1
Aud
X22
A front panel audio input level adjustment has occurred.
X1
is input number and
X22
is the audio gain or attenuation level.
Video and audio mute
X2
Vmt
X3
A front panel video mute operation has occurred.
X2
is output number and
X3
is
the mute status: 0 =off (video not muted, 1 = on (video muted).
X2
Amt
X3
A front panel audio mute operation has occurred.
X2
is output number and
X3
is
the mute status: 0 =off (audio not muted, 1 = on (audio muted).
PAL film mode
X1
Flm
X3
The PAL film mode has been selected or deselected from the front panel for the
selected input.
X1
is input number and
X3
is the on/off status for PAL film mode.
Automated adjustments
Img
X3
The Auto Image feature has been turned on or off from the front panel for all tie
creations.
X3
is the on/off status.
Aut
X3
The auto presets feature has been turned on or off from the front panel for all tie
creations.
X3
is the on/off status.