Extron Electronics IPL T S Series User Guide - Manual (Page 69)

4-29 IPL T S Series • Communication and Control
2. Try to “ping” the unit by entering “ping 192.168.254.254” at the DOS
command prompt, or use the IP or Web address provided to you by your
system administrator. If you get no response:
a.
Make sure your unit is using the appropriate subnet mask (check with
your system administrator).
b. Make sure your PC does not have a software firewall program that might
block the IP address of the unit.
3. If contact is established with the unit, but the unit’s Web pages cannot be
accessed by your Web browser, verify (in the Options or Preferences menu)
that your Web browser is configured for direct network connection and is not
set up to use a proxy server.
If you are still experiencing problems, call the Extron S 3 Sales & Technical Support
Hotline.