Configuration using global configurator, Connection and configuration, cont’d – Extron Electronics IPL T S Series User Guide User Manual
Page 32
Connection and Configuration, cont’d
IPL T S Series • Connection and Configuration
3-8
Figure 3-7 — Executing the ARP command
3
.
To confirm the new IP address is active, perform a ping command to the new
IP address.
example: C:\>ping 10.13.197.64
If the IP address setting was successful, the device replies 3 or more times:
Reply from
Configuration using Global Configurator
Global Configurator (GC) is a simple-to-use, yet comprehensive software
application that allows non-programmers to configure a wide range of Extron
IP Link-enabled products. GC provides an integrated environment for
defining A/V control and monitoring system functionality from an easy-to-use
graphical user interface. It’s simple enough to be used for configuring a single
room controller, yet powerful enough to facilitate building a Web-based asset
management and remote monitoring system for hundreds of A/V devices in
multiple locations.
Serial ports on the IPL T S Series devices can be configured using GC.
Global Configurator is available for free from www.extron.com.
To download Global Configurator:
1
. Open and Internet browser and advance to www.extron.com.
2
. Click the Download tab.
3
. Click the Global Configurator icon.
4
.
Click the Download Now button.
5
. Complete the Personal Information form.
6
. Scroll down the page and review any related Technical Bulletins.
7
. Click the Download GCSW3XX.exe button.
8
. Follow the remaining system prompts.