Extron Electronics IN31608 - Manual (Page 4)

1

2001 - INLINE, Inc. IN31608 OPERATION MANUAL - REV 1.6 1/4/01
Product Overview
DESCRIPTION:
The IN31608 Presentation Switcher combines the easy operation and serial control capabilities of a projector
switcher with the flexibility of a matrix switcher. Featuring RGBHV + stereo audio matrix switching, 350 MHz
bandwidth and two switching modes, the IN31608 is ideal for permanent installations, rentals, complex staging
operations and any other display system requiring a high performance, economical presentation switcher.
Direct Switching Mode - In the Direct Mode, the IN31608 acts as a projector switcher, routing composite, S-
Video and RGB signals to the appropriate outputs. The user simply presses one of the input buttons and that
input signal is automatically routed to the pre-programmed output(s).
Matrix Switching Mode - For advanced applications requiring multiple outputs, the IN31608 can operate as a
true 16 x 8 matrix switcher. In the Matrix Mode, users press an output button followed by an input button and a
new patch is immediately executed.
Projector Control - The IN31608 can store and transmit serial ASCII or hex projector control strings to
projectors, INLINE products or other serial controlled AV equipment in RS-232, RS-422 or RS-485 modes.
Windows
TM
software provided with the switcher makes it easy to set up the unit and store control codes. All
projector control strings are provided by the installing technician.
Front Panel Controls
INPUT 1 - 16:.............. Selects a particular input
BLANK: ...................... Selects no input (Blanks the selected output)
OUTPUT 1 - 8:............ Selects a particular output for the Matrix Mode and Direct Mode Setup
SAVE, RECALL: ....... For Matrix Mode only, saves or recalls a memory configuration
MUTE:......................... Mutes the audio for the selected output
VOLUME
¾:.............. Increases the volume
VOLUME
¿:.............. Decreases the volume
F1, F2, F3 and F4: ...... Sends the pre-programmed code out the projector port
SWITCHING MODE: For Matrix Mode (only), selects the current switching mode as either:
1) Video, Sync, and Audio
2) Video and Sync only
3) Audio only