Extron Electronics FOXBOX Tx_Rx DVI Plus User Guide - Manual (Page 39)

FOXBOX Tx/Rx • Remote Control 33
Firmware upgrade
Firmware can be upgraded for each unit via the front panel Configuration port on that unit
using the Extron Firmware Loader utility from the FOX Extender Control Program.
NOTES: • When firmware upgrades are available, they are unique to the unit:
• A unique transmitter firmware upgrade for the Tx unit
• A unique receiver firmware upgrade for the Rx unit.
• Your PC must be connected directly to the unit for the firmware to be updated.
Downloading the firmware from the website
To obtain the latest version of firmware for your FOXBOX unit:
1. Visit the Extron website, www.extron.com , click the Download tab, and then click the
Firmware link on the left sidebar menu (figure 17).
1
1
Figure 17. Location of Firmware Upgrade Files
2. On the Download Center screen (figure 18), click the links for the appropriate firmware
file or files.
NOTE: There are different files for transmitters (Txs) and receivers (Rxs) and for VGA
and DVI units.
2
Figure 18. FOXBOX Firmware
3. Complete the Personal Information form (figure 19) and click the Download button.
3
Figure 19. Personal Information Form