Html operation – Extron Electronics FOX RS 104 User Guide User Manual
Page 23
FOX RS 104 RS-232 Inserter • Remote Control
17
HTML Operation
The inserter can be controlled and operated through its LAN port, connected via a LAN
or WAN, using a web browser such as the Microsoft Internet Explorer. The display in the
browser of the status or operation of the inserter has the appearance of web pages. This
chapter describes the factory-installed HTML pages, which are always available and cannot
be erased or overwritten.
NOTE: If your Ethernet connection to the inserter is unstable, try turning off the proxy
server in your Web browser. In Microsoft Internet Explorer, click
Tools
>
Internet
Options
>
Connections
>
LAN Settings
, uncheck the
Use a proxy server...
box,
and then click
OK
.
Opening the Embedded Web Pages
Access the inserter using HTML pages as follows:
1.
Start the web browser program.
2.
Click in the Address field of the browser.
3.
Enter the inserter address in the Address field of the browser.
NOTE: If the local system administrators have not changed the value, the
factory-specified default, 192.168.254.254, is the correct value for this field.
4.
If you want the browser to display a page other than the default page (such as a
custom page that you have uploaded), enter a slash (/) and the file name to open.
NOTES:
•
The
Address
field of the browser should display the address in the following
format: <
xxx.xxx.xxx.xxx
>/<
optional_file_name
>.html.
•
The HTML language reserves certain characters for specific functions (see
“
” on page 28).
5.
Press the keyboard
If the inserter is not password protected, it checks and downloads the HTML pages
(proceed to step 6).
If the inserter is password protected, the inserter downloads the Windows Security
page (see figure 9).
Figure 9.
Windows Security Page