Extron Electronics FOX RS 104 User Guide - Manual (Page 10)

FOX RS 104 RS-232 Inserter • Introduction 4
Features
RS-232 insertion to or extraction from one or more of the fiber optic outputs (or
both insertion and extraction) from the Ethernet port— Allows direct insertion of
bidirectional serial control data into an optical signal.
Standard fiber optic signal architecture — Compatible optical signals are digital signals
from 270 Mbps through 4.25 Gbps that are sent and received via fiber optic small form
factor pluggable (SFP) modules with LC-type connectors. The inserter is compatible with
FOX matrix switchers and DAs and FOX, FOXBOX, and PowerCage FOX transmitters and
receivers.
Buffered fiber optic outputs — Original power level is maintained on each output to
maximize distance capabilities and ensure full availability of optical loss budget.
Output reclocking — Reshapes and restores timing of the digital signal.
Ethernet monitoring and control — Enables Web-based remote management,
monitoring, and control.
Ethernet connectivity for integration with a control system — Eliminates the need for
separate control system wiring to remote devices.
Real-time status LED indicators for troubleshooting and monitoring — Rear panel
LEDs verify link status and power.
Rack-mountable 1U, half rack width metal enclosure
Internal universal power supply — The 100-240 VAC, 50/60 Hz, international power
supply provides worldwide power compatibility.