beautypg.com

Installation, Installation overview – Extron Electronics DVI DA Plus Series User Guide User Manual

Page 9

background image

Installation

This section describes:

Installation Overview

Rear Panel Features

Installation Overview

All three distribution amplifiers can be mounted on tabletops, under furniture, and in racks
by following these steps:

1.

Ensure that the input sources, the distribution amplifier and the output displays are all
turned off and all power sources and signal cables are disconnected.

2.

Mount the unit as described in

“Mounting” on page 15

.

3.

Connect the cables (

see “Rear Panel Features” on page 4

).

4.

If required, configure the internal DIP switches to

disable EDID

(see page 8) from

certain outputs or to activate the

EDID Lock mode

(see page 10).

5.

Plug in the

power supply

(see page 4).

6.

Turn on the display devices.

7.

Turn on the input devices (see “

Operation

” on page 7).

DVI DA Plus Series • Installation

3