Extron Electronics AVT 100 - Manual (Page 23)

Software Configuration and Control, cont’d
AVT 100 • Software Configuration and Control AVT 100 • Software Configuration and Control
Advanced Instruction Set commands
The advanced instr
uctions use hexadecimal commands that ar
e mor
e complex than the Simple Instr
uction Set.
They ar
e used by the W
indows-based contr
ol pr
ogram and special thir
d party applications.
4-13
Command/r
esponse table for Advanced Instruction Set commands
Command
Hex c
ommand
Response
Additional information
(host to A
VT 100)
(A
VT 100 to host)
Read/write entir
e memory (to back up or r
estor
e the system)
Read
all
memory
contents
90
91
xxxx bytes of data + 1 byte checksum
Uploads all channels saved, active channel, pr
esets, mode selection,
and audio settings.
W
rite all memory contents
90 92 + xxxx bytes of data + 1 byte checksum
Dn1
Downloads all channels saved, the active channel, pr
esets, mode
selection, and audio settings.
4-12
Command/r
esponse table for special function SIS commands (continued)
Command
ASCII c
ommand
Response
X!
values
(host to A
VT 100)
(A
VT 100 to host)
and additional descriptions
V
iew Auto-Scan channels V
iew all channels
0
*1
0
#
chn002
•
X!
List all channels.
chn003 •
X!
1 = Enable.
.
0 = Disable.
. .
V
iew specific channel
X1
*10#
X!
Show a specified channel. For
X!
:
0 = Of
f.
1 = On. X1
= Channel #.
CA
TV fr
equency selection (NTSC model only)
Set fr
equency
X!
* 1
1#
Cbl
X!
Select the set of fr
equencies
used by your cable company: For
X!
:
1 = IRC. 2 = HRC. 3 = Standar
d (default).
4 = Japan standar
d
.
V
iew fr
equency setting
11
#
Cbl
X!