Xylem HandyLab 600 - Manual (Page 58)

Maintenance, cleaning, disposal HandyLab 600
58 ba77064e01 03/2014
10.2 Cleaning
Occasionally wipe the outside of the measuring instrument with a damp, lint-
free cloth. Disinfect the housing with isopropanol as required.
10.3 Packing
This meter is sent out in a protective transport packing.
We recommend: Keep the packing material. The original packing protects the
meter against damage during transport.
10.4 Disposal
At the end of its operational lifetime, the meter must be returned to the
disposal or return system statutory in your country. If you have any questions,
please contact your supplier.
3. Place four batteries (type Mignon AA) in the battery compartment.
4. Close the battery compartment (2) and tighten the screws (1).
5. Set the date and time
(see section 4.4.5 E
XAMPLE 2 ON NAVIGATION : S ETTING THE DATE AND
TIME
, page 20).
Dispose of used batteries according to the local regulations of your
country.
End users within the European Union are obligated to return used
batteries
(even ecologically compatible ones) to a collection point set up for
recycling
purposes.
Batteries are marked with the crossed-out waste container
symbol. Therefore, they may not be disposed with the domestic
waste.
CAUTION
The housing is made of synthetic material (ABS). Thus, avoid
contact with acetone or similar detergents that contain sol-
vents. Remove any splashes immediately.