Xylem HandyLab 600 - Manual (Page 49)

HandyLab 600 Data memory
ba77064e01 03/2014 49
8 Data memory
You can store measured values (datasets) to the data memory:

Manual data storage (see section 8.1 M ANUAL STORAGE , page 49)
 Automatic data storage at intervals (see section 8.2 A UTOMATIC DATA STOR -
AGE AT INTERVALS
, page 50)
Each data storage process transmits the current dataset to the interface at the
same time.
8.1 Manual storage
You can store a measurement dataset to the data memory as follows. The
dataset is at the same time output to the interface:
If the memory is full When all memory locations are occupied, it is not possible to continue storing.
Then you can e.g. store the data from the memory to a PC (see section 8.3.1
E
DITING THE MEASUREMENT DATA MEMORY , page 52) and subsequently erase
the data memory (see section 8.3.2 E RASING THE MEASUREMENT DATA MEMORY ,
page 53).
1. Press the key shortly.
The menu for manual data storage appears.
2. If necessary, change and confirm the ID number (1 ... 10000) with
<><> and .
The dataset is stored. The meter switches to the measured value dis-
play.
01.02.2014 07:43:33
pH 7.000 24.8 °C AR +++
ID number: 1
continue
Manual data storage 4 von 500
01.02.2014
08:00
Back