Xylem HandyLab 600 - Manual (Page 45)

HandyLab 600 Settings
ba77064e01 03/2014 45
7.3.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values.
System / General / Con-
trast 0 ... 50 ... 100 % Changes the display contrast
System / General / Shutoff
time 10 min ... 1h ...
24 h Adjusts the switch-off time
System / General / Tem-
perature unit °C
°F Temperature unit,
degrees Celsius or degrees Fahrenheit.
All temperature values are displayed with the
selected unit.
System / General / Stabil-
ity control on
off Switches on or off the automatic stability control
during measurement (see section 7.3.3 A
UTOMATIC
S TABILITY CONTROL , page 46 )
System / Interface / Baud
rate 1200, 2400,
4800, 9600,
19200 Baud rate of the USB Device interface
System / Interface / Out-
put format ASCII
CSV Output format for data transmission
For details, see section 9 T
RANSMITTING DATA
(USB
INTERFACE ), page 55
System / Interface /
Decimal separator Dot (xx.x)
Comma (xx,x) Decimal separator
System / Interface / Out-
put header Output of a header for Output format: CSV
System / Clock function Date format
Datum
Time Settings of time and date.
For details, see section 4.4.5 E
XAMPLE 2 ON NAVIGA -
TION : S ETTING THE DATE AND TIME , page 20
System / Service informa-
tion Hardware version and software version of the meter
are displayed.
System / Reset - Resets the system settings to the default values.
For details, see section 7.4.2 R
ESETTING THE SYS -
TEM SETTINGS , page 48
Menu item Possible setting Explanation
Detailed information on the memory functions of the HandyLab 600
are given in section 8 D
ATA MEMORY , page 49.