Xylem HandyLab 600 - Manual (Page 12)

Commissioning HandyLab 600
12 ba77064e01 03/2014
3.3.1 Inserting the batteries
You can operate the meter either with normal batteries or with
rechargeable batteries (Ni-MH). In order to charge the batteries, an
external charging device is required.
1. Open the battery compartment (1) on the underside of the
meter.
1 Screws
2 Battery compartment
CAUTION
Make sure that the poles of the batteries are positioned cor-
rectly.
The ± signs on the batteries must correspond to the
± signs in
the battery compartment.
2. Place four batteries (type Mignon AA) in the battery compartment.
3. Close the battery compartment (1).
4. Set the date and time
(see section 4.4.5 E
XAMPLE
2
ON NAVIGATION
: S
ETTING THE DATE AND TIME
,
page 20).
2
1