Acer Altos G540 M2 User Manual

Page 62

3 System upgrade

(1) Slide the cage into the lower bay with the HDD carriers facing

front.

Then lock the cage by sliding the locker down as shown.

If you have installed a hot-plug HDD cage, proceed to next
step for related drive cable connections.

Drive cable connections for an easy-swap HDD can be found
on page page 58.

(2) Connect the following cables to the hot-plug HDD cage

backplane board.

(1) Connect the hard drive power cables to the CN1 and CN2

connectors of the backplane board.