Armasight NSCCOMR00133DB1 CO-MR GEN 3 Bravo Day/night vision Clip-On system - Manual (Page 7)

7
1
INTRODUCTION
1.1 GENERAL INFORMATION
1.1.1 TYPE OF MANUAL
Operation and Maintenance (including a List of Spare Parts).
1.1.2 MODEL NUMBER AND EqUIPMENT NAME
Armasight CO-MR Night Vision Clip-On System
Armasight CO-MR MG Night Vision Clip-On System
1.1.3 PURPOSE OF EqUIPMENT
The CO-MR is a night vision system intended to be used for short to medium ranges (normally up to 700
yards) in conjunction with a daytime sight, or riflescope (hereafter referred to as a “day scope”). When
mounted on a weapon in front of an existing day scope, the CO-MR adds to the scope’s capabilities a
night vision function, without affecting the boresight.
The CO-MR is compatible with most commercial and military specification day scopes or binoculars up
to 7X magnification and fits any Picatinny MIL STD 1913 or Weaver rail via the quick release mount.
Optional adapters make it possible to mount the CO-MR directly to the objective lens of a variety of
day scopes and binoculars.
A long-range IR850 illuminator (hereafter referred to as the IR850) enables use of the CO-MR in ex-
tremely low light conditions or total darkness. Other additional equipment, such as an infrared laser,
red dot sight, etc., may also be installed on the CO-MR.
NOTE:
The CO-MR can also be installed in front of the viewfinders of various instruments to widen the
operational illumination range.
1.1.4 REPORTING EqUIPMENT IMPROVEMENT RECOMMENDATIONS
Recommendations from the user for improvements to the device are encouraged.
Mail your comments to Armasight Inc., 815 Dubuque Avenue, South San Francisco, CA 94080, USA.
Or, send an email to [email protected].