Armasight NSCCOMR00133DB1 CO-MR GEN 3 Bravo Day/night vision Clip-On system - Manual (Page 3)

3
WARNING:
This product contains natural rubber latex which may cause allergic reactions! The FDA
has reported an increase in the number of deaths that are associated with an apparent sensitiv-
ity to natural latex proteins. If you are allergic to latex, it is good idea to learn which products
contain it and strictly avoid exposure to those products.
WARNINGS:
• When installing the equipment on a weapon, be sure the weapon is clear and the safety is on
before proceeding.
• It is recommended that you use an eyecup on the eyepiece of the day scope, allowing for the
eyepiece diameter and eye relief and having side paddle preferably in order to escape detec-
tion.
• The light from the infrared illuminator is invisible to the unaided eye. However, the light can
be detected by other night vision devices.
CAUTION:
• DO NOT dismantle the equipment.
• Keep the equipment clean. Protect it from moisture, dramatic temperature changes, and elec-
tric shocks.
• DO NOT drop or hit the equipment.
• Protect the equipment from overexposure to light: DO NOT activate the equipment in day-
light with the objective lens cap removed; DO NOT aim the equipment at bright light sources
(a fire, car headlights, lanterns, street lamps, room lights, etc.).
• DO NOT force the equipment controls past their stopping points.
• DO NOT leave the equipment activated during breaks in operation.
• Verify that the equipment is off before installing a battery.
• DO NOT store the equipment with the battery still in it.
• To avoid deformation or damage, remove the light suppressor from the CO-MR before placing
the equipment in storage.
• Thoroughly clean and dry each item before placing them into the storage case.
• Scope Mounting Systems are not recommended for installing the CO-MR on firearms having
vigorous recoil (0.308 Win or stronger).
NOTES:
• Optical axes of the CO-MR and day scope should align. It is not recommended for the distance
between the axes to exceed 3 mm. If the difference in the axis heights of the CO-MR and day
scope above the weapon rail exceeds 3 mm, you will need to replace the day scope mounting
rings or monoblock.
• At operating temperatures below -20 °C (-4 °F), alkaline battery life will be severely reduced.
Under said conditions, the use of lithium battery is recommended.
• The equipment requires some level of ambient light (moonlight, starlight, etc.) to function
correctly.
• Performance of the device in nighttime conditions depends on the level of ambient light in
the environment. Please remember the following:
— The level of ambient light is reduced by the presence of clouds, shade, or objects that
block natural light (trees, buildings, etc.).
— The equipment is less effective when operated in shadows and other darkened areas.
— The equipment is less effective when operated in rain, fog, sleet, snow, dust or smoke.
— The equipment will not “see” through dense smoke.
• For the purpose of returning defective components, retain all packaging materials.