Armasight DACCIPHBB01NTS1 Cipher Digital Night Vision Clip-on System - Manual (Page 3)

3
WARNING:
When installing the equipment on a weapon, verify that the weapon is clear and that the safety
is on before proceeding.
WARNING:
This product contains natural rubber latex, which may cause allergic reactions! The FDA
has reported an increase in the number of deaths that are associated with an apparent sensitiv-
ity to natural latex proteins. If you are allergic to latex, it is a good idea to learn which products
contain it and strictly avoid exposure to those products.
WARNING:
It is recommended that you use an eyecup on the eyepiece of the day scope. This will allowfor
comfort and adjustment. It will also prevent light from escaping through the eyepiece and alert-
ing other NVD users to your location.
CAUTION:
Although the equipment is highly resistant to damage from light overload, DO NOT point it,
either powered or inoperative, directly at the sun or any other source of high-intensity light
that the unprotected human eye cannot tolerate (such as welding arc). To prevent inadvertent
exposure to these light sources, never leave the equipment unsupervised with the objective
lens cap removed.
CAUTION:
• Do not dismantle the equipment.
• Keep the equipment clean. Protect it from moisture, dramatic temperature drops, and elec-
trical shocks.
• DO NOT drop or hit the equipment.
• DO NOT force the equipment controls past their stopping points.
• DO NOT leave the equipment activated during breaks in operation.
• Verify that the equipment is off before installing a battery.
• To avoid losing unsaved data, DO NOT remove the batteries or disconnect an external power
source while the Cipher is on.
• Do not store the equipment with the batteries still in it.
• Thoroughly clean and dry each item before storing them in the carrying case.
• To avoid deformation or damage, remove the light suppressor from the Cipher before plac-
ing the equipment in storage.
• Scope Mounting Systems are not recommended for installing the Cipher on firearms with
vigorous recoil (0.308 Win or stronger).
NOTES:
• Optical axes of the Cipher and day scope should align. It is not recommended for the dis-
tance between the axes to exceed 3 mm. If the difference in the axis heights of the Cipher
and day scope above the weapon rail exceeds 3 mm, you will need to replace the day scope
mounting rings or monoblock.
• Inadvertent sun damage is not considered a defect in material or workmanship, and is there-
fore not covered in the product warranty.