Asus WL-330 - Manual (Page 59)

59 ASUS Pocket Wireless Access Point
3. Configuration
Parameter Default value
Wireless Interface
SSID ........................................................................... ANY
Operating Mode .......................................................... Infrastructure Mode
Channel ...................................................................... 1
Transmission Rate ..................................................... Automatic
Preamble .................................................................... Long
Authentication Method ............................................... Open System or Shared Key
Encryption ................................................................... None
MAC cloning ............................................................... Enabled
Button Scan Mode
Button Scanning ......................................................... Enabled
Scan Mode ................................................................. Find the connection with the
.................................................................................... strongest link quality
Specified Profile ......................................................... Profile 1
3.6.3 Firmware Upgrade
The Firmware Upgrade page displays the product ID, firmware version, and
regulation domain. This page also allows you to restore or update the ASUS
Pocket Wireless AP firmware when it becomes outdated or corrupted. Refer to
page 3-23 for details.
3.6.4 Restoring the default values
The following are the default values of the ASUS Pocket Wireless AP (Ethernet
adapter mode). You may restore these values by pressing the reset button over
five seconds.