Asus WL-330 - Manual (Page 51)

51 ASUS Pocket Wireless Access Point
3. Configuration
Button Scan Mode
Button Scan Mode. The Button Scan Mode allows you to use the reset button
to connect to an access point (Infrastructure mode) or wireless device (Ad-hoc
mode) saved in the Profile Table of the configuration utility or in your lcoation.
Save the profile of the wireless connection using the Site Survey window. See
the next page for details.
Scan Mode. This field allows you to
select the scan mode for button
scanning. Click the arrow to display
available options.
Find the connection with the strongest link quality- When the reset button is
pressed for less than 5 seconds, the ASUS Pocket Wireless AP connects to an
AP or wireless device with the strongest link quality.
Same as the above mode but only in the profile table - When the reset button is
pressed for less than 5 seconds, the ASUS Pocket Wireless AP searches for an
AP or wireless device in the Profile Table, then connects to the one with the
strongest link quality.
Same as the above mode but find extra site in my location- When the reset
button is pressed for less than 5 seconds, the ASUS Pocket Wireless AP
searches for an AP or wireless device in the Profile Table and in your location,
then connects to the one with the strongest link quality.
Profile Scan (total x)- This mode allows you to connect to a saved wireless
network by their sequence in the Profile Table. Press the reset button once to
connect to the first wireless connection in the Profile Table. Press again to
connect to the second wireless connection, and so on.
You must save at least one wireless connection profile before using the Button Scan
Mode.