Asus WL-330 - Manual (Page 33)

33 ASUS Pocket Wireless Access Point
3. Configuration
Note: If you are trying to connect to an
AP (Infrastructure), make sure the MAC
address of the ASUS Pocket Wireless AP
is included in the AP authorization table.
2. Enter the SSID in the Network
Name field.
3. Select the network channel.
4. Select the network type. Choose
Infrastructure if you wish to
connect to an AP. Select Ad Hoc if
you wish to connect to another
wireless device.
5. Enable or disable MAC cloning. MAC cloning allows the ASUS Pocket
Wireless AP to use the MAC address of the host computer in communicating
with other wireless devices.
6. Click the Encryption tab or the
WEP link to configure the device
WEP encryption settings.
Note: Change the device WEP
encryption settings only when your
selected hetwork has an enabled WEP
encryption.
7. Obtain the WEP encryption keys
from the network administrator.
8. Check the Data encryption option.
9. Select the Shared Key or Open System or Shared Key method from the
Authentication drop-down menu.
10. Select the WEP encryption key format and key length. Refer to page 3-5 for
details.
11. Enter the WEP keys in the Key 1 ~ 4 fields.
12. Click OK when done.