Asus Terminator K7 - Manual (Page 97)

ASUS Terminator K7 Barebone System 97
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set
to [Enabled] if you want to use USB devices. Configuration options:
[Disabled] [Enabled]
Primary VGA BIOS [PCI Card]
If your computer has both PCI and AGP VGA cards, this field allows
you to select which of the cards will act as your primary graphics
card. [AGP Card] uses the AGP card as your primary card. The default,
[PCI Card], allows your PCI graphics card to take precedence when
detected. Configuration options: [PCI Card] [AGP Card]
PCI/PNP IRQ Resource Exclusion
IRQ XX Reserved for Legacy Device [No/ICU]
These fields indicate whether or not the displayed IRQ for each field
is being used by an onboard legacy (non-PnP) device. The default
value indicates either that the displayed IRQ is not used or that ISA
Configuration Utility (ICU) is being used to determine if a legacy device
is using that IRQ. Configuration options: [No/ICU] [Yes]