Asus Terminator K7 - Manual (Page 83)

ASUS Terminator K7 Barebone System 83
When the Setup program is accessed, the following screen appears:
System Time [XX:XX:XX]
Sets your system to the time that you specify (usually the current
time). The format is hour, minute, second. Valid values for hour,
minute and second are Hour: (00 to 23), Minute: (00 to 59), Sec-
ond: (00 to 59). Use the or + keys to move
between the hour, minute, and second fields.
System Date [XX/XX/XXXX]
Sets your system to the date that you specify (usually the current
date). The format is month, day, year. Valid values for month, day,
and year are Month: (1 to 12), Day: (1 to 31), Year: (100 year range).
Use the or + keys to move between the month,
day, and year fields.
Legacy Diskette A [1.44M, 3.5 in.], Legacy Diskette B [None]
Sets the type of floppy drives installed. Configuration options:
[None] [1.44M, 3.5 in.]
Floppy 3 Mode Support [Disabled]
This is required to support older Japanese floppy drives. The
Floppy 3 Mode feature allows reading and writing of 1.2MB (as
opposed to 1.44MB) on a 3.5-inch diskette. Configuration options:
[Disabled] [Enabled]
5.4 Main Menu