Asus Terminator K7 - Manual (Page 96)

96 Chapter 5: BIOS Information
5.5.3 PCI Configuration
Slot 1, Slot 2, IRQ [Auto]
These fields set how IRQ use is determined for each PCI slot. The
default setting for each field is [Auto], which utilizes auto-routing to
determine IRQ use. Configuration options: [Auto] [NA] [3] [4] [5] [7]
[9] [10] [11] [12] [14] [15]
PCI/VGA Palette Snoop [Disabled]
Some nonstandard VGA cards, such as graphics accelerators or
MPEG video cards, may not show colors properly. The setting
[Enabled] should correct this problem. Otherwise, leave this on the
default setting of [Disabled]. Configuration options: [Disabled]
[Enabled]
PCI Latency Timer [32]
Leave on default setting for best performance vs. stability.
SYMBIOS SCSI BIOS [Auto]
[Auto] allows the motherboard’s BIOS to detect whether you have a
Symbios SCSI card. If the Symbios SCSI card is detected, the
motherboard’s Symbios BIOS will be enabled; if no Symbios SCSI
card is detected, the onboard Symbios SCSI BIOS will be disabled.
[Disabled] will disable the motherboard’s Symbios SCSI BIOS so
that the BIOS on an add-on Symbios SCSI card can be used. If your
Symbios SCSI card does not have a BIOS, the Symbios SCSI card
will not function. Configuration options: [Auto] [Disabled]