Asus Terminator K7 - Manual (Page 59)

ASUS Terminator K7 Barebone System 59
A7VC
®
A7VC Wake-On-Ring Connector
WOR
Ring# Ground
1 2
10. Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-
On-Ring output. The connector powers up the system when a
ringup packet or signal is received through the internal modem
card. NOTE: For external modems, Wake-On-Ring is detected
through the COM port.
11. LCD-TV Headers (18-pin, 18-1 pin LCDTV)
These headers require an optional LCD module for LCD output
or a TV-out module for TV output.
A7VC
®
A7VC LCD-TV Headers
LCDTV
1
LTVCL
+3V
TVVSYNC
GND
DD4
DD3
DD1
GND
TV#/LCD
PAL/NTSC#
GND
BLANK
TVHSYNC
GND
DD2
DD0
+5V
GND
DD11
DD9
DD7
GND
DD5
+5V
PCIRST#
DD10
GND
DD8
DD6
CLKOUT0
GND
VSPCLK1
VSPD1
LCDTV_ON#
IMPORTANT
This feature requires that the Power Up On External Modem Act
parameter is enabled (see 5.5.1 Power Up Control) and that the
system has an ATX power supply with at least 720mA +5V standby
power.