Asus Terminator K7 - Manual (Page 90)

90 Chapter 5: BIOS Information
CPU Level 1 Cache, CPU Level 2 Cache [Enabled]
These fields allow you to choose from the default of [Enabled] or
choose [Disabled] to turn on or off the CPU’s Level 1 and Level 2
built-in cache. Configuration options: [Disabled] [Enabled]
CPU Level 2 Cache ECC Check [Disabled]
This function controls the ECC capability in the CPU level 2 cache.
Configuration options: [Disabled] [Enabled]
BIOS Update [Enabled]
This functions as an update loader integrated into the BIOS to supply
the processor with the required data. In the default position of
[Enabled], the BIOS will load the update on all processors during
system bootup. Configuration options: [Disabled] [Enabled]
PS/2 Mouse Function Control [Auto]
The default of [Auto] allows the system to detect a PS/2 mouse on
startup. If detected, IRQ12 will be used for the PS/2 mouse. IRQ12
will be reserved for expansion cards only if a PS/2 mouse is not
detected. [Enabled] will always reserve IRQ12, whether on startup a
PS/2 mouse is detected or not. Configuration options: [Enabled] [Auto]
USB Legacy Support [Auto]
This motherboard supports Universal Serial Bus (USB) devices. The
default of [Auto] allows the system to detect a USB device on startup.
If detected, the USB controller will be enabled. If not detected, the
USB controller will be disabled. When this field is set to [Disabled],
the USB controller is disabled no matter whether you are using a
USB device or not. Configuration options: [Disabled] [Enabled] [Auto]
OS/2 Onboard Memory > 64M [Disabled]
When using OS/2 operating systems with installed DRAM of greater
than 64MB, you need to set this option to [Enabled]; otherwise, leave
this on [Disabled]. Configuration options: [Disabled] [Enabled]