Asus Terminator K7 - Manual (Page 17)

ASUS Terminator K7 Barebone System 17
2.2 Detach the Drive Frame
After removing the chassis cover, you must remove the power socket
module from the back panel first, before opening the drive frame.
2. Remove the screw (located
on the rear panel frame) that
secures the power socket
module.
Follow these steps to detach the
drive frame.
1. Place the chassis on a flat
surface and turn it on its side.
Notice that the power socket
and voltage selector switch
are attached to a metal
module, which is secured to
the rear panel.
Module
screw
Power Socket
Module
WARNING!
Do not plug the main power connector into the power socket
until you have completed a system installation.
Power Socket and Voltage Selector Switch