Asus SL1200 - Manual (Page 89)

72
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
9.4.1 Outbound ACL Rule Configuration Parameters
Table 9.2 describes the configuration parameters available for firewall
outbound ACL rule.
Table 9.2. Outbound ACL Rule Configuration Parameters
Field Description
ID
Add New Click on this option to add a new ‘basic’ Firewall rule.
Rule Number Select a rule from the drop-down list to modify its attributes.
Action
Allow Select this button to configure the rule as an allow rule. This
rule when bound to the Firewall will allow matching packets
to pass through.
Deny Select this button to configure the rule as a deny rule. This
rule when bound to the Firewall will not allow matching
packets to pass through.
Move to
This option allows you to set a priority for this rule. router's firewall acts on packets
based on the priority of the rules. Set a priority by specifying a number for its position in
the list of rules:
1 (First) This number marks the highest priority.
Other numbers Select other numbers to indicate the priority you wish to
assign to the rule.
Source IP
This option allows you to set the source network to which this rule should apply. Use
the drop-down list to select one of the following options:
Any This option allows you to apply this rule to all the computers
in the local network.
IP Address This option allows you to specify an IP address on which this
rule will be applied.
IP Address Specify the appropriate network address
Subnet This option allows you to include all the computers that are
connected in an IP subnet. When this option is selected, the
following fields become available for entry:
Address Enter the appropriate IP address.
Mask Enter the corresponding subnet mask.