Asus SL1200 - Manual (Page 73)

56
Chapter 8 - Configuring DDNS
ASUS SL1200
8.1 DDNS Configuration Parameters
Table 8.1 describes the configuration parameters available for DDNS
service.
Table 8.1. DDNS Configuration Parameters
Field Description
DDNS State
Enable
Click on this radio button to enable the DDNS Service
Disable Click on this radio button to disable the DDNS Service
DDNS Type – select a DDNS service type: HTTP or RFC-2136 DDNS
HTTP DDNS Click this radio button if HTTP DDNS is desired.
DNS Zone Name
Enter the registered domain name provided by your ISP. The host name of the router
has to be configured in the System Information Setup page properly. For example, If
the host name of your router is “host1” and the DNS Zone Name is “yourdomain.com”.
The fully qualified domain name (FQDN) is “host1.yourdomain.com”.)
HTTP DDNS Specific Settings
DDNS Service [For HTTP DDNS only]
dyndns
Visit http://www.dyndns.org for more details.
zoneedit Visit http://www.zoneedit.com for more details.
dyn-tokyo Visit http://www.dns-tokyo.jp for more details.
DDNS User name [For HTTP DDNS only]
Enter the user name provided by your DDNS service provider in this field.
DDNS Password [For HTTP DDNS only]
Enter the password provided by your DDNS service provider in this field.
8.2 Access DDNS Configuration Page
Log into Configuration Manager as administrator, and click the DDNS
menu. The DDNS Configuration page displays, as shown in Figure 8.2.
When you open the DDNS Configuration page, a list of existing DDNS
configuration is displayed at the bottom half of the configuration page such
as those shown in Figure 8.2.