Asus SL1200 - Manual (Page 109)

92
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
9.7.1.4 Modify an IP Pool
To modify an IP Pool
1. Open the IP Pool Configuration page. See section 9.7.1.2 Access IP
Pool Configuration Page.
2. Click on the icon of the IP pool to be modified in the IP Pool List
table or select the IP pool from the IP Pool drop-down list.
3. Make desired changes to any or all of the following fields: Pool name,
Pool type and IP address.
4. Click on < Modify> to save the new settings. The new settings for this
pool will then be displayed in the IP Pool list table.
9.7.1.5 Delete an IP Pool
To delete an IP Pool, click on the icon of the IP pool to be deleted or
follow the instruction below:
1. Open the IP Pool Configuration page. See section 9.7.1.2 Access IP
Pool Configuration Page.
2. Click on the icon of the IP pool to be deleted in the IP Pool List table
or select the IP pool from the IP Pool drop-down list.
3. Click on < Delete> to delete this IP pool.
9.7.1.6 IP Pool Example
Figure 9.17. Network Diagram for IP Pool Configuration