Asus SL1200 - Manual (Page 106)

89
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
9.6.3.2 Access DoS Configuration Page – (Firewall -> Advanced
-> DoS)
Log into Configuration Manager as administrator. Click Firewall ->
Advanced -> DoS. The DoS Configuration page displays as shown in
Figure 9.15.
When you open the DoS Configuration page, a list of default DoS
protection is also displayed at the bottom half of the configuration page
such as those shown in Figure 9.15. These protections are enabled by
default when firewall is enabled.
9.6.3.3 Configuring DoS Settings
By default, most DoS protection against all supported attack types are
enabled. Figure 9.15 shows the default configuration for DoS settings.
You may check or un-check individual type of attack defense to disable or
enable protection against that specific type of attack.
Figure 9.15. DoS Configuration Page