Asus SL1200 - Manual (Page 101)

84
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
• Delete an existing service
• View configured services
Figure 9.14 shows the Firewall Service List Configuration page. The
configured services are listed at the bottom half of the same page.
Figure 9.14. Service List Configuration Page
9.6.2.1 Service List Configuration Parameters
Table 9.5 describes the available configuration parameters for firewall
service list.
Table 9.5. Service List Configuration Parameters
Field Description
Service Name Enter the name of the Service to be added. Only
alphanumeric characters are allowed in a name.
Protocol Enter the type of protocol the service uses.
Port Enter the port number that is set for this service.
9.6.2.2 Access Service List Configuration Page – (Firewall ->
Advanced -> Service)
Log into Configuration Manager as administrator. Click Firewall ->
Advanced -> Service. The Service List Configuration page displays, as
shown in Figure 9.14.
When you open the Service List Configuration page, a list of existing
configured services is also displayed at the bottom half of the configuration
page such as those shown in Figure 9.14.