Asus SL1200 - Manual (Page 110)

93
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
1. Open the IP Pool Configuration page to create two IP groups – see
Figure 9.18.
Figure 9.18. IP Pool Example – Add Two IP Pools – MISgroup1 and MISgroup2
2. Associate an IP pool to firewall ACL rules – inbound, outbound or group
ACL by selecting IP Pool from the Source IP Type drop-down list and then
choose an IP pool from the IP pool dropdown list. In this example, IP pool
is used to associate to source IP. However, it can be used to associate to
destination IP as well. As shown in Figure 9.19, MISgroup1 is not allow to
play the network game, Quake-II, at all times.
Figure 9.19. IP Pool Example – Deny QUAKE-II Connection for MISgroup1