Asus SL1200 - Manual (Page 31)

14
Chapter 3 - Quick Start Guide
ASUS SL1200
3.2.2 Windows ® XP PCs
1. In the Windows task bar, click Start -> Control Panel.
2. Double-click the Network Connections icon.
3. In the LAN or High-Speed Internet window, right-click on icon
corresponding to your network interface card (NIC) and select
Properties. (Often this icon is labeled Local Area Connection).
The Local Area Connection dialog box displays with a list of currently
installed network items.
4. Ensure that the check box to the left of the item labeled Internet
Protocol TCP/IP is checked, and click < Properties>.
5. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio
button labeled Obtain an IP address automatically. Also click the radio
button labeled Obtain DNS server address automatically.
6. Click < OK> twice to confirm your changes, and close the Control
Panel.
3.2.3 Windows ® 2000 PCs
Check for the IP protocol and, if necessary, install it.
1. In the Windows task bar, click Start -> Settings -> Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click the Local
Area Connection icon, and then select Properties.
The Local Area Connection Properties dialog box displays a list of
currently installed network components. If the list includes Internet
Protocol (TCP/IP), then the protocol has already been enabled. Skip to
step 10.
4. If Internet Protocol (TCP/IP) does not display as an installed
component, click < Install>.
5. In the Select Network Component Type dialog box, select Protocol,
and then click < Add>.
6. Select Internet Protocol (TCP/IP) in the Network Protocols list, and
then click < OK>.